Early Switchboard Parts
Page 2 - Switchboard Meters
Front of panel mounting, made for the Air Ministry (AM) looks like Metropolitan-Vickers trademark
on the scale, 0-75mV FSD, moving coil 6-1/4" diameter body, 7-1/4" base flange. Pressed steel body.
Bit of an imposter this one and the next. Both are probably from a Dynamo/Starter Motor test rig.
This one is for starter motor testing hence the large amperage figures.
Cast iron body.
Glass broken when bought, flush panel mounting, 8" flange, 6-1/4" body, 75mV sensitivity.
As above but 0-10A scale, probably for field current. 75mV sensitivity again.
AC ammeter, 5A FSD, scaled 400/5A which means a 400A Current Transformer is required.
Cast iron body, made by Weir Electrical Instrument Company, front panel mounting, 6-5/8" body, 7-1/2" base.
• Main •
Page 1 •
Page 3 •
Page 4 •
Page 5 •
Page 6 •
Page 7 •
Page 8 •